+(91)-(22)-2389 1189 info@kencotubes.com / exports@kencotubes.com

 

Inconel X-750 Round Bar

Inconel X-750 Bar

ASTM B637 Inconel X-750 Bars

Inconel X-750 Round Bar and Rod

Inconel X-750 Round Bars and Rods

ASTM B637 Inconel X-750 Round Bars Manufacturers, Inconel Alloy X-750 Round Bars, ASME SB637 Alloy X750 Bar Suppliers in Mumbai, India.

Kencotube is a prominent manufacturer & dealer of ASTM B637 Inconel X-750 Round Bars, which has good impact strength at room temperature and retains virtually all of that strength at low temperatures. Sulfur-based oil should be used as a lubricant in these ASTM B637 Inconel X-750 Bars, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.For higher properties, ASTM B637 Inconel X-750 Rods can be cold worked below 1200 Degree F (649 Degree C), where it can be joined by the usual welding, brazing, and soldering process.Rotating-beam and high-strain, along with low-cycle fatigue tests were performed in these ASME SB637 Alloy X-750 Round Bars at room temperature on material in each of the four conditions, where the results of these tests indicate that grain size and mechanical properties have no appreciable effect on low-cycle fatigue strength.

ASTM B637 Inconel X-750 Bars, Alloy X750 Round Bar, Inconel X-750 Bright Bars, Inconel X-750 Square Bar, Inconel Alloy X-750 Rectangular Bar, ASME SB637 Inconel Alloy X-750 Round Bars, UNS N07750 Bars, DIN 2.4669 Round Bar, Inconel X-750 Forged Bars, X750 Inconel Hex Bar, Inconel X750 Flat Bars, X-750 Inconel Alloy Cold Finished Bars, Inconel X-750 Black Bar, Inconel X-750 Threaded Bars Suppliers.

ASME SB637 Alloy X-750 Bars are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. ASME SB637 Alloy X-750 Rods resists steam and mixtures of steam, air and carbon dioxide, which has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. When heated, Inconel UNS N07750 Round Bars forms a thick and stable passivating oxide layer protecting the surface from further attack, where further it is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.

ASTM B637 / ASME SB637 Inconel X-750 Round Rods, Inconel X-750 Polished Rods, Inconel X-750 Square rod Supplier, Inconel X750 Hex Rods Exporter, UNS N07750 Inconel Round Rods, DIN 2.4669 Rods Stockists, Inconel X750 Threaded Rods, Inconel X-750 Welding Rods, Inconel X-750 Rod, Inconel Alloy X750 Bright Rods Manufacturers.

Specifications ASTM B637 / ASME SB637
Standard ASTM, ASME and API
Range 5 mm to 500 mm Dia
Length 100 mm to 6000 mm
Finishing Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Industry Names Alloy X-750, X750, Inconel Alloy X-750

Inconel X750 ASTM Standard

STANDARD UNS WERKSTOFF NR. AFNOR GOST JIS
Inconel X-750 N07750 2.4669 - - -

Inconel Alloy X750 Chemical Composition

Ni Cr Al C Mn Ti Cu Si S
70.0 min 14.0 - 17.0 0.40 - 1.0 .08 max 1.00 max 2.25 - 2.75 0.50 max .50 max .01 max

Inconel X750 Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.28 g/cm3 1430°C 1267 MPa 868 MPa 25 %

Other Types of Inconel Alloy X750 Round Bars and Rods

  • Inconel X-750 Round Bar and Rod
  • Inconel X-750 Hexagonal Bars & Rods
  • Inconel X-750 Forged Bars & Rods
  • Inconel Alloy X750 Rectangular Bars
  • Inconel X-750 Square Bars, Rods
  • Inconel X-750 Threaded Bar & Rods
  • Inconel X-750 Bright Bars and Rods
  • B637 Inconel X750 Welding Rods
  • Inconel X-750 Black Bars & Rods
  • Inconel X-750 Polished Rods and Bars
  • ASTM B637 Inconel X-750 Bars & Rods
  • Inconel X-750 Cold Finish Round Bar
  • ASME SB 637 Inconel X-750 Round Bars, Rods
  • UNS N07750 / DIN 2.4669 Round Bars
  • Inconel Alloy X-750 Round Bar
Our City-wise Supply :

Madrid, Karachi, Seoul, Santiago, Atyrau, Tehran, Riyadh, Kolkata, Indore, Thane, Howrah, Secunderabad, Ahvaz, Chennai, Bengaluru, Aberdeen, Nagpur, Al Khobar, Ernakulam, Kuala Lumpur, Ahmedabad, Houston, Chiyoda, Montreal, Vung Tau, Dubai, Bangkok, Gimhae-si, Rajkot, Moscow, Lahore, Jeddah, Doha, Hanoi, Ludhiana, Ulsan, Mexico City, Manama, Geoje-si, Ranchi, Granada, Courbevoie, London, Hong Kong, Coimbatore, Istanbul, Vadodara, Port-of-Spain, Sydney, Ankara, Rio de Janeiro, Colombo, Kanpur, Los Angeles, Lagos, Noida, Haryana, Jakarta, Pune, Melbourne, Bogota, Sharjah, Busan, Baroda, Nashik, Al Jubail, Gurgaon, Brisbane, Faridabad, La Victoria, Jamshedpur, Muscat, Visakhapatnam, Thiruvananthapuram, Mumbai, Cairo, Toronto, Ho Chi Minh City, Surat, Petaling Jaya, Perth, Navi Mumbai, New York, Chandigarh, Dallas, Abu Dhabi, Caracas, Singapore, New Delhi, Jaipur, Bhopal, Milan, Hyderabad, Dammam.

Our International Supply chain :

Ireland, South Africa, Bangladesh, Germany, Nepal, Morocco, Portugal, Pakistan, Peru, Poland, Saudi Arabia, Trinidad & Tobago,Tunisia, Japan, Kuwait, Romania, United Kingdom, Croatia, New Zealand, Ghana, Greece, Chile, Costa Rica, Libya, Jordan, Macau, Hungary, Qatar, Mexico, Spain, Finland, Angola, Netherlands, Iran, Austria, Ecuador, Serbia, Italy, Thailand, Turkey, Canada, Oman, Namibia, Bulgaria, Bahrain, United States, Singapore, Brazil, Gambia, Zimbabwe, Colombia, Israel, Vietnam, China, Bhutan, Norway, Egypt, France, Czech Republic, Argentina, Tibet, Sweden, Algeria, Slovakia, Iran, Switzerland, Kazakhstan, Mexico, Bolivia, Belgium, Puerto Rico, India, Mongolia, Gabon, South Korea, Chile, Nigeria, United Arab Emirates, Venezuela, Afghanistan, Taiwan, Yemen, Lithuania, Iraq, Denmark, Ukraine, Belarus, Lebanon, Estonia, Malaysia, Nigeria, Sri Lanka, Australia, Russia, Poland, Hong Kong, Azerbaijan, Indonesia, Kenya, Philippines.

Round Bar and Rod