Inconel 601 Round Bar
Inconel 601 Round Bars and Rods
ASTM B166 Inconel 601 Round Bars Manufacturers, Inconel Alloy 601 Round Bars, ASME SB166 Nickel 601 Bar Suppliers in Mumbai, India.
Kencotube is a renowned manufacturer & exporter of ASTM B166 Inconel 601 Round Bars, where the high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds. ASTM B166 Inconel 601 Bars also makes virtually immune to chloride-ion stress-corrosion cracking. The versatility of ASTM B166 Inconel 601 Rods has led to its use in a variety of applications involving temperatures from cryogenic to above 2000 Degree F (1095 Degree C). ASME SB166 Alloy 601 Round Bars is not an age hardening alloy; cold working is the only available means of hardening. In ASME SB166 Alloy 601 Bars, softening by annealing begins at about 1600 Degree F (871 Degree C), and is reasonably complete after 10-15 minutes of heating at 1800 Degree F (982 Degree C).
UNS N06601 Bars, DIN 2.4851 Round Bar, Inconel 601 Forged Bars, 601 Inconel Hex Bar, ASTM B166 Inconel 601 Bars, ASME SB166 Inconel Alloy 601 Round Bars, Alloy 601 Round Bar, Inconel 601 Bright Bars, Inconel 601 Square Bar, Inconel Alloy 601 Rectangular Bar, Inconel 601 Flat Bars, 601 Inconel Alloy Cold Finished Bars, Inconel 601 Black Bar, Inconel 601 Threaded Bars Suppliers.
Above this temperature in ASME SB166 Alloy 601 Rods, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, Inconel UNS N06601 Round Bars may be water quenched or air cooled. ASTM B166 Nickel Alloy 601 Round Bars can be both hot formed and cold formed using typical processes. Meanwhile, hot working in ASTM B166 Nickel Alloy 601 Bars should be performed between 1600 Degree F and 2250 Degree F avoiding any work between the ranges of 1200 Degree F – 1600 Degree F, because the ductility decreases in this temperature range.
Inconel 601 Square rod Supplier, Inconel 601 Hex Rods Exporter, UNS N06601 Inconel Round Rods, DIN 2.4851 Rods Stockists, Inconel 601 Threaded Rods, Inconel 601 Welding Rods, Inconel 601 Rod, ASTM B166 / ASME SB166 Inconel 601 Round Rods, Inconel 601 Polished Rods, Inconel Alloy 601 Bright Rods Manufacturers.
| Specifications | ASTM B166 / ASME SB166 |
| Standard | ASTM, ASME and API |
| Range | 5 mm to 500 mm Dia |
| Length | 100 mm to 6000 mm |
| Finishing | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Industry Names | Alloy 601, Inconel 601, Nickel 601, Inco 601 |
Inconel 601 Equivalent
| UNS | WERKSTOFF NR. | GOST | AFNOR | JIS | BS | EN | OR |
|---|---|---|---|---|---|---|---|
| N06601 | 2.4851 | XH60BT | NC23FeA | NCF 601 | NA 49 | NiCr23Fe | ЭИ868 |
Inconel 601 Chemical Composition
| Grade | Ni | Cr | Fe | C | Mn | S | Si | Cu |
|---|---|---|---|---|---|---|---|---|
| Inconel 601 | 58.0 - 63.0 | 21.0 -25.0 | Bal | 0.10 max | 1.0 max | 0.015 max | 0.5 max | 1.0 max |
Inconel 601 Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Our City-wise Supply :
Bhopal, Navi Mumbai, Al Khobar, Al Jubail, Hyderabad, Hanoi, Pimpri-Chinchwad, Nashik, Cairo, Ulsan, Kolkata, Chiyoda, Riyadh, Tehran, Vung Tau, Chandigarh, Bogota, Milan, Muscat, Port-of-Spain, Jamshedpur, Abu Dhabi, Kanpur, Ankara, Lagos, Visakhapatnam, Ranchi, Busan, Haryana, Granada, Montreal, Vadodara, Edmonton, Rajkot, Lahore, Petaling Jaya, Dallas, Baroda, Istanbul, New Delhi, Houston, Noida, Madrid, Melbourne, Toronto, Bengaluru, Jaipur, Secunderabad, Bangkok, Moscow, Doha, Dubai, Faridabad, Mexico City, Surat, Perth, Ernakulam, Colombo, Howrah, La Victoria, Pune, Caracas, Gurgaon, Chennai, Calgary, Ahmedabad, Rio de Janeiro, Kuala Lumpur, Brisbane, Nagpur, Thiruvananthapuram, London, Courbevoie, Ahvaz, Santiago, Ludhiana, Aberdeen, Seoul, Coimbatore, Manama, Hong Kong, Indore, Atyrau, Gimhae-si, Thane, Geoje-si, Algiers, Ho Chi Minh City, Karachi, Sydney, New York, Sharjah, Jeddah, Mumbai, Jakarta.
Our International Supply chain :
South Korea, France, Bulgaria, United States, Iran, Oman, Trinidad & Tobago,Tunisia, Canada, Spain, Nigeria, Switzerland, Estonia, Iran, South Africa, Kuwait, Macau, Norway, Greece, Zimbabwe, Gambia, Russia, Algeria, Bangladesh, Peru, Finland, Chile, Taiwan, United Arab Emirates, Colombia, Bhutan, Malaysia, Netherlands, Sri Lanka, India, Costa Rica, Yemen, Germany, Pakistan, Morocco, Serbia, Slovakia, Argentina, Vietnam, Poland, Puerto Rico, Austria, Sweden, Portugal, Ukraine, Ecuador, Philippines, Romania, Egypt, Bolivia, Kazakhstan, Qatar, Thailand, Denmark, Croatia, Tibet, Nepal, Namibia, Belgium, Kenya, Israel, Nigeria, Mexico, Mongolia, Venezuela, Poland, Mexico, Turkey, Indonesia, Hong Kong, Ghana, Jordan, Azerbaijan, Czech Republic, Singapore, Chile, Australia, Saudi Arabia, Ireland, Bahrain, Italy, China, Japan, Lebanon, Libya, Lithuania, Hungary, Angola, Belarus, Brazil, Iraq, New Zealand, United Kingdom, Gabon, Afghanistan.
Round Bar and Rod
Inconel 601 Round Bar
Inconel 601 Hex Bar
Inconel 601 Square Bar
Inconel 601 Rectangular Bar
Inconel 601 Threaded Rod
Inconel 601 Rods
Inconel 601 Cold Drawn Bars
Inconel 601 Flat Bars
Inconel 601 Hot Rolled Bars