Nickel Forged Fittings

Nickel Alloy 200 / 201 Forged Socket weld Fittings

Nickel Forged Socket weld Fittings

Nickel Alloy 200 / 201 Forged Threaded Fittings

Nickel Forged Threaded Fittings

ASTM B564 Nickel Alloy Forged Fittings Manufacturers, ANSI B16.11 Nickel 200 Forged Fittings, ASME SB564 Nickel 201 Forged Fittings Suppliers in Mumbai, India.

Kencotube is a pioneer in manufacturing of quality Nickel Forged Fittings, which is commercially pure (99.6%) wrought nickel. Nickel Forged Pipe Fittings is normally limited to service at temperatures below 600 Degree F, where at higher temperatures it can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel Alloy Forged Pipe Fittings, where hot working temperatures should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degre F. Annealing in these Nickel Alloy Forged Threaded Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Meanwhile, care should be taken when choosing the anneal temperature in Nickel Alloy Forged Fittings and time at temperature for this can greatly influence the mechanical properties and structure of the material.

200 / 201 High Pressure Forged Fittings UNS N02200 Nickel Forged Fittings, ASME SB564 Nickel 200 / 201 Forged Threaded Fittings, ASME SB564 UNS N02201 Threaded Fittings, Nickel Alloy Fittings, Nickel Threaded Elbow Stockists, Nickel Forged Threaded Tee, Nickel Full and Half Coupling, B564 Nickel Threaded Bush, Nickel Alloy 201 Threaded Fittings Exporters, Nickel 200 Threaded Fittings, Threaded Fittings, Nickel Alloy Forged Threaded Plug, Nickel Threaded Boss, Nickel Forged Threaded Swage Nipple, Manufacturers and Supplier of DIN 2.4066 / 2.4068 Forged Threaded Fittings in India.

The lower carbon content of Nickel Alloy Forged Threaded Elbow Fittings makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel Alloy Forged Socket Weld Elbow Fittingsare approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel Alloy Forged Threaded Tee Fittings has good mechanical properties and excellent resistance to many corrosive environments. Other valuable features of Nickel Alloy Forged Socket Weld Tee Fittings are its magnetostrictive and magnetic properties, high electrical and thermal conductivities, low vapour pressure and low gas content.

Nickel Socket Weld Fittings, Nickel 200 Socketweld Forged Fittings, ANSI B16.11 Nickel Alloy 201 Forged Socket Weld Fittings, UNS N02200 / N02201 Nickel Alloy Socket Weld Fittings Manufacturers, ASME SB564 Nickel Socket Weld Reducer Insert, Nickel Socket weld 90 deg Elbow, DIN 2.4066 / 2.4068 Nickel 45 deg Elbow, Nickel Socket weld Cross, Nickel Alloy Socket weld Forged Coupling, Nickel Socket weld Pipe Cap, Nickel Socket Weld Tees, ASTM B564 Nickel Alloy Forged Socket weld Fittings, Nickel Socket weld Union Stockholders and Suppliers.

Specifications ASTM B564 / ASME SB564
Standards ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size 1/2"NB TO 4"NB IN
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT
Grade Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201)
Forged Fittings Types 45 Deg Elbow, 90 Deg Elbow, Forged Tee, Union, Full Coupling, Half Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Welding Boss, Hexagonal Nipple etc.

Nickel Alloy 200/201 Equivalent Grade

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 - LC-Ni 99

Nickel Alloy Composition

Grade C Mn Si Cu S Mg Ni Ti Fe
Nickel 200 0.15 max 0.35 max 0.1 max 0.25 max 0.01 max - 99.0 min - 0.4 max
Nickel 201 0.02 max 0.35 max 0.2 max 0.25 max 0.01 max 0.15 max 99.0 min 0.1 max 0.4 max

Nickel Chromium Alloy Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200/201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Other Types of Nickel Forged Fittings

  • UNS N02200 / DIN 2.4066 Forged Fittings
  • UNS N02201 / DIN 2.4068 Forged Fittings
  • ASTM B564 Nickel 200 Forged Fittings
  • ASME SB564 Nickel 201 Forged Fittings
  • Nickel Forged 90°, 45° Elbow
  • Nickel Alloy Forged Tee
  • Nickel Forged Hex Plug
  • Nickel Forged Adapter
  • Nickel Forged Swage Nipple
  • Nickel Reducing Coupling
  • Nickel Union (Male x Female)
  • Nickel Welding Boss
  • Nickel Forged Bushing
  • Nickel Forged Lateral Outlet
  • Nickel Forged Pipe Cap
  • Nickel Forged Branch Outlet
  • Nickel Alloy Street Elbow

Our City-wise Supply :

Kanpur, Moscow, La Victoria, Jakarta, Manama, Bogota, Thiruvananthapuram, Al Jubail, Jeddah, Chandigarh, Istanbul, Ankara, New Delhi, Dammam, Petaling Jaya, Algiers, Karachi, Mumbai, Santiago, Ho Chi Minh City, Vadodara, Madrid, Atyrau, Faridabad, Gimhae-si, Colombo, Riyadh, Perth, Gurgaon, Haryana, Ranchi, Nagpur, Chiyoda, Doha, Hyderabad, Port-of-Spain, Indore, Pune, Ahvaz, Tehran, Jamshedpur, Sharjah, Ahmedabad, Al Khobar, London, New York, Melbourne, Hong Kong, Ulsan, Bhopal, Dallas, Busan, Ernakulam, Hanoi, Lagos, Howrah, Nashik, Lahore, Muscat, Thane, Seoul, Aberdeen, Baroda, Chennai, Dubai, Houston, Milan, Calgary, Kuala Lumpur, Rajkot, Ludhiana, Rio de Janeiro, Granada, Noida, Coimbatore, Bengaluru, Mexico City, Caracas, Bangkok, Brisbane, Kuwait City, Edmonton, Secunderabad, Visakhapatnam, Surat, Cairo, Courbevoie, Jaipur, Kolkata, Pimpri-Chinchwad, Toronto, Navi Mumbai, Sydney, Vung Tau, Montreal.

Our International Supply chain :

Tibet, Costa Rica, Ecuador, Bulgaria, Nigeria, United States, Netherlands, Libya, Austria, Lithuania, Finland, Saudi Arabia, Switzerland, Spain, Algeria, Peru, Italy, Russia, Iraq, Azerbaijan, Venezuela, Kuwait, Bolivia, Lebanon, Croatia, Nepal, Argentina, Belgium, New Zealand, United Kingdom, Malaysia, Qatar, Oman, Bhutan, Sri Lanka, Brazil, Morocco, Sweden, Hungary, Taiwan, Jordan, Pakistan, Hong Kong, Mexico, United Arab Emirates, Gambia, Ukraine, South Africa, Japan, Portugal, Angola, Zimbabwe, Yemen, Afghanistan, Belarus, Kazakhstan, Iran, Czech Republic, Mongolia, Trinidad & Tobago,Tunisia, Macau, Ghana, Kenya, Norway, Puerto Rico, Romania, Serbia, Egypt, Iran, Colombia, Vietnam, Turkey, Australia, Denmark, Indonesia, Singapore, Namibia, South Korea, China, Greece, Slovakia, Estonia, Canada, Chile, Poland, Thailand, Poland, Mexico, Philippines, Chile, Israel, Nigeria, Gabon, India, Bahrain, France, Ireland, Germany, Bangladesh.

Forged Fittings