Alloy 20 Flanges, Carpenter 20 Flanges, Incoloy Alloy 20 Flanges, ASTM B564 / B462 Alloy 20 Flanges Manufacturers & Suppliers

ASTM B564 Alloy 20 Flanges Manufacturers, ANSI B16.5, ANSI B16.47, ANSI B16.36 Alloy 20 Flanges, ASTM B462 Alloy 20 Flanges Suppliers in Mumbai, India.

Kencotube is one of the leading manufacturer & exporter of high quality of Alloy 20 Flanges, which has low corrosion rates in neutral and distilled water and can be hot formed to any shape and formed cold by all methods. Specifically designed to withstand sulfuric acid, Alloy 20 Pipe Flanges offers excellent corrosion resistance. Due to its nickel, chromium, molybdenum and copper levels Alloy 20 Slip On Raised Face Flanges is ideal for use in corrosive environments. Alloy 20 Blind Raise Face Flanges is most frequently specified in environments ranging from mildly oxidizing through neutral, and in moderately reducing conditions. As with commercially pure nickel, Alloy 20 Weld Neck Raised Face Flanges is low in strength in the annealed condition. For this reason, a variety of tempers are used which have the effect of increasing the strength level of Alloy 20 Socket Weld Raised Face Flanges.

Alloy 20 Flanges, Alloy 20Cb-3 Flanges, Incoloy 20 Flanges, Carpenter 20 Flanges, UNS N08020 Flanges Exporters, DIN 2.4660 Flanges, Alloy 20 Slip-On Flanges Manufacturers, Alloy 20 Blind Flanges, Alloy 20 Socket Weld Flanges, Alloy 20 Threaded Flanges Suppliers.

An additional application area of Alloy 20 Lap Joint Flanges is in marine environments and other non-oxidizing chloride solutions. Kencotube provides its customers with a variety of Alloy 20 Threaded Flanges stock shapes under the high quality standards. Alloy 20 Orifice Flanges is a nickel-iron-chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid. Typically, nickel content in Alloy 20 Ring Type Joint Flanges makes up approximately 30 percent of its composition, with iron being found in equal if not greater amounts. Meanwhile, we as well provide our patrons with custom made sizes as per their requirements.

Alloy 20 Weld-Neck Flanges, Alloy 20 Spectacle Flanges, Alloy 20 Lap-joint Flanges Stockholders, Alloy 20 Orifice Flanges, Alloy 20 Forged Flanges Dealers, Alloy 20 Plate Flanges, Alloy 20 Loose Flanges Manufacturers, Alloy 20 Groove Flanges Stockists.

Specifications	ASTM B564 / B462, ASME SB564 / SB462
Standards	ASTM, ASME, ANSI, JIS, DIN, BSNA 11, EN Ni 99.2, JIS NW 2200, GOST-НП-2
Dimensions	ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Size	1/2″NB TO 60″NB
Class	150#, 300#, 600#, 900#, 1500#, 2500#
Class	150#, 300#, 600#, 900#, 1500#, 2500#
Pressure	DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160.
Flanges Products	Expander Flanges, Forged Flanges, Blind Flanges, Reducing Flanges, Orifice Flanges, Socket Weld Flanges, Slip On Flanges, Flat Flanges, Lapped Joint Flanges, High Hub Blinds Flanges, Nipo Flanges, Threaded Flanges, Square Flanges, Long Neck Weld Flanges, RTJ Flanges etc

STANDARD	WERKSTOFF NR.	UNS	AFNOR	EN
Alloy 20	2.4660	N08020	Z2NCUD31-20AZ	NiCr20CuMo

STANDARD

WERKSTOFF NR.

UNS

AFNOR

Alloy 20

2.4660

N08020

Z2NCUD31-20AZ

NiCr20CuMo

Ni	Fe	C	Mn	Si	Cu	Cr	Mo	S	P	Nb
32 - 38	Bal	0.02 max	1 - 2	0.7 max	3 - 4	19 - 21	2 - 3	0.005 max	0.02 max	0.1 - 0.3

32 - 38

Bal

0.02 max

1 - 2

0.7 max

3 - 4

19 - 21

2 - 3

0.005 max

0.02 max

0.1 - 0.3

Alloy 20 Machinability

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Alloy 20	8.1 g/cm3	1443 °C (2430 °F)	Psi -80,000, MPa -551	Psi - 35,000, MPa - 241	30 %

Other Types of Alloy 20 Flanges

Alloy 20 Long Neck Flanges
Alloy 20 Flat Face Flanges
Alloy 20 Raised Face Flanges
Alloy 20 Square Flanges
Alloy 20 Ring Type Joint Flanges
Alloy 20 Nipo Flanges
Alloy 20 Reducing Flanges
Alloy 20 Drawing Flanges
Alloy 20 Screwed Flanges
ASME B16.47 Series A & B Flanges
Alloy 20 Loose Flanges
Alloy 20 Lapped joint Flanges
Alloy 20 Weld-Neck Flanges
Carpenter 20, 20Cb-3 Flanges
ASTM B564 /ASME SB564 Alloy 20 Flanges
ASTM B462 /ASME SB462 Alloy 20 Flanges

Our City-wise Supply :

Noida, Dammam, Vung Tau, New Delhi, Tehran, Hyderabad, Sharjah, New York, Coimbatore, Edmonton, Haryana, Dallas, Vadodara, Chiyoda, Jaipur, Rajkot, Los Angeles, Jamshedpur, Pune, Ahvaz, Al Jubail, Santiago, Karachi, Al Khobar, Ahmedabad, Bhopal, Petaling Jaya, Lahore, Seoul, Thane, Kuwait City, Jeddah, Geoje-si, Lagos, Atyrau, Riyadh, Ernakulam, Jakarta, Kanpur, Chandigarh, Baroda, Courbevoie, Visakhapatnam, Granada, Nashik, Port-of-Spain, Navi Mumbai, Gurgaon, Secunderabad, Bangkok, Gimhae-si, Busan, Indore, Milan, Calgary, Kolkata, Sydney, Aberdeen, Howrah, Mexico City, Perth, Ho Chi Minh City, Ulsan, Kuala Lumpur, Thiruvananthapuram, Chennai, Melbourne, Muscat, Ranchi, Pimpri-Chinchwad, Surat, Doha, Bogota, London, Hanoi, Montreal, La Victoria, Cairo, Colombo, Caracas, Nagpur, Brisbane, Mumbai, Houston, Manama, Faridabad, Rio de Janeiro, Ludhiana, Madrid, Moscow, Bengaluru, Ankara.

Our International Supply chain :

Belgium, Spain, Bahrain, India, Australia, Nigeria, Gambia, Canada, New Zealand, South Korea, Trinidad & Tobago,Tunisia, Ireland, Austria, Iran, Gabon, Mongolia, Italy, Israel, Bhutan, Nigeria, Jordan, Netherlands, Brazil, Macau, Turkey, Portugal, Hong Kong, Poland, Czech Republic, Puerto Rico, Kuwait, Ghana, Peru, Lebanon, Angola, Ukraine, United Kingdom, Kenya, China, Mexico, Iraq, Germany, France, Namibia, Estonia, Yemen, Croatia, Sri Lanka, Pakistan, Finland, Denmark, Thailand, Romania, Indonesia, Kazakhstan, Singapore, Ecuador, United Arab Emirates, Iran, Poland, Argentina, Saudi Arabia, Norway, Qatar, Serbia, Zimbabwe, United States, Chile, Morocco, Bulgaria, Libya, Colombia, Costa Rica, Azerbaijan, Afghanistan, Nepal, Bolivia, Japan, Sweden, Greece, Egypt, Tibet, Chile, Philippines, Bangladesh, Belarus, Lithuania, South Africa, Hungary, Malaysia, Switzerland, Taiwan, Venezuela, Russia, Slovakia, Oman, Mexico, Algeria, Vietnam.

Flanges