Sheets are found in different metals like Stainless Steel, Brass, Aluminium, Copper, Nickel, Titanium, Carbon steel etc. A sheet is thinner item that is been cut from a continuous big rolled coil, and are less than 1mm or upto 25mm thick. Whereas a plate is a bit thicker item of a metal and is be […]
Stainless steel 316l heat exchanger tubes are well known for their outstanding characteristics and properties. To survive in extreme atmospheric conditions, this tube consists of high-quality stainless steel that offers superior corrosion resistance and strong tensile strength. This commodity is a traditional form that is commonly used by the manufacturing industries. What is a 316H […]
The chromium-nickel alloy Inconel 600 is designed for use at temperatures down to 2000 degrees F and down to lower levels of cryogenicity. Due to the content of nickel and weaker oxidising conditions resistant to chromium content, the alloy is resistant to the declining atmosphere and also to chloride stress corrosion cracking. Along with the […]
The chromium-nickel alloy Inconel 600 is designed for use at temperatures below 2000 ° F and lower levels of cryogenicity. Due to the material resistant to chromium nickel and weak oxidation conditions, the alloy is resistant to the falling environment as well as chloride to stress corrosion cracking. With a high nickel content, the Inconel […]
Incoloy 800 is a nickel-iron-chromium alloy which was introduced in the year 1950 into the market to meet the need for a relatively low nickel content heat- and corrosion-resistant alloy. This is because the nickel was at that time designated a “strategic” metal. It has been commonly used over the past forty years for its […]
The Incoloy 800 is an alloy based on nickel, iron & chromium. The Incoloy 800 bars are known not only for their strong strength, but also for their excellent oxidation and carburization resistance when exposed to elevated temperatures. There are two additional alloys that can be extracted from the Incoloy 800. And the incorporation of […]
The Incoloy 800 is a nickel-iron-chromium alloy that exhibits various characteristics and demonstrates its use in a wide variety of applications. This alloy is able to hold the austenitic structure in place. This nickel steel alloy has a high carbon level of 800 H and consists of 1.20 percent aluminium as well as added titanium. […]
Inconel 625 is a high-performance alloy of nickel-chromium-molybdenum noted for its high strength rating, resistance to temperature and resistance to corrosion. This superalloy consists primarily of nickel, followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace quantities of manganese, silicon, aluminium, and titanium (58% min.). What are the applications of Inconel 625? Marine applications […]
Incoloy 800 Bars are nickel-iron-chromium alloys with good strength and outstanding resistance to oxidation and carburization in high-temperature exposure. Due to its nickel content Incoloy 800 Bars highly are resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is outstanding. Incoloy 800 is mainly used in […]
Inconel 625 is a nickel-chromium alloy is employed for its high strength, outstanding fabricability and excellent resistance to corrosion. Service temperatures range from cryogenic to 1800 degrees F (982 degrees C). Inconel 625 is resistant to corrosion and is used both for its high strength and outstanding resistance to aqueous corrosion. Due to the addition […]
© Kenco Tubes Blog 2021. Powered by WordPress
72, Pote bldg, Office No-3, 1st Floor,
C.P. Tank Road, Mumbai - 400 004
+(91)-(22)-2389 1189 / 6639 3765