+(91)-(22)-2389 1189 info@kencotubes.com / exports@kencotubes.com

 

Reducing Tee

ASME B16.9 Reducing Tee

ASME B16.9 Reducing Tee

ANSI B16.9 Reducing Tee

ANSI B16.9 Butt weld Reducing Tee

ANSI B16.9 Reducing Tee Manufacturers, ASME B16.9, B16.28 Wrought Steel Buttwelding Tees, Seamless Reducing Tee, Welded Reducing Tee Fitting Suppliers in Mumbai, India.

Kencotube is reputed manufacturing and trading house of Reducing Tee Pipe Fittings, which are not intended for use with Victaulic couplings for plain end pipe. Stainless Steel Reducing Tee Pipe Fittings, regardless of their material composition, are always described in the same fashion. To describe Carbon Steel Reducing Tee Pipe Fittings, you must first locate the largest size on the run of the tee. The size indicated in the description of Alloy Steel Reducing Tee Pipe Fittings is the side opposite to that with the largest size on the run of the body. Alloy 20 Steel Reducing Tee Pipe Fittings ensures an easier working environment in confined places and removes the need for hot works on site. Meanwhile, installation of Duplex Steel Reducing Tee Pipe Fittings can be reduced by around 40 percent against traditional fixing methods.

Tees, Reducing Tee, Pipe Reducing Tee, Reducing Tee Fitting, Butt weld Reducing Tee, Pipe Fittings Reducing Tee, Alloy Steel Reducing Tee Dealers, ASTM A403 Stainless Steel Reducing Tee, High Quality Reducing Tee Exporters, Copper Nickel Reducing Tee Stockists, A234 WP Carbon Steel Reducing Tee, Duplex Steel Reducing Tee, Super Duplex Steel Reducing Tee, Manufacturers and Suppliers of Reducing Tees in Various types of Material Grades.

The final size in any description of Super Duplex Steel Reducing Tee Pipe Fittings is the branch side. A continuously operated re-circulating system in Monel Reducing Tee Pipe Fittings is a water-replenished circulating system which is maintained at a constant high temperature to provide a constant source of hot water. High temperatures in Nickel Alloy Reducing Tee Pipe Fittings can withstand 114 Degree C intermittently for short periods. Hastelloy Reducing Tee Pipe Fittings should not be used on an uncontrolled heat source. Copper Nickel Reducing Tee Pipe Fittings does not readily corrode, rust or stain with water as ordinary steel does.

High Nickel Alloy Reducing Tee Exporters, Reducing Tee Fitting, Brass Reducing Tee Dealers, Hastelloy Reducing Tee, Inconel Alloy Reducing Tee, MSS SP-43 Wrought and Fabricated Butt Welding Reducing Tee Fittings for Low Pressure, SS Reducing Tee, Monel Alloy Reducing Tee, Incoloy Reducing Tee, Alloy 20 Reducing Tee, Titanium Reducing Tee, Wrought Austenitic Stainless Steel Reducing Tee Stockists and Stockholders.

ASME B16.9 Buttweld Pipe Reducing Tee Specification

Standard ASME / ANSI - B 16.9, ASTM A403 - ASME SA403, ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
Size 1/2"NB TO 48"NB IN
Thickness Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Type Seamless / ERW / Welded / Fabricated
Form Pipe Reducing Tee, Reducing Tee, Fitting Tee, Butt weld Tee

Reducing Tee Material and Grades

Stainless Steel Reducing Tee : ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

Duplex & Super Duplex Steel Reducing Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462

Carbon Steel Reducing Tee : ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

Alloy Steel Reducing Tee : ASTM A234, ASME SA234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91

Nickel Alloy Reducing Tee : ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.

Low Temperature Carbon Steel Reducing Tee : ASTM A420 WPL3, A420 WPL6

Dimensions of Reducing Tees to ASME B16.9

Nominal Pipe Size

Outside diameter at bevel

Center-to-End

Run

Outlet

Run

Outlet

Run (C)

Outlet (M)

1/2" 1/4"
3/8"
21.3 13.7
17.3
25 25
3/4" 3/8"
1/2"
26.7 17.3
21.3
29 29
1" 1/2"
3/4"
33.4 21.3
26.7
38 38
1 1/4" 1/2"
3/4"
1"
42.2 21.3
26.7
33.4
48 48
1 1/2" 1/2"
3/4"
1"
1 1/4"
48.3 21.3
26.7
33.4
42.2
57 57
2" 3/4"
1"
1 1/4"
1 1/2"
60.3 26.7
33.4
42.2
48.3
64 44
51
57
60
2 1/2" 1"
1 1/4"
1 1/2"
2"
73.0 33.4
42.2
48.3
60.3
76 57
64
67
70
3" 1 1/4"
1 1/2"
2"
2 1/2"
88.9 42.2
48.3
60.3
73.0
86 70
73
76
83
3 1/2" 1 1/2"
2"
2 1/2"
3"
101.6 48.3
60.3
73.0
88.9
95 79
83
89
92
4" 1 1/2"
2"
2 1/2"
3"
3 1/2"
114.3 48.3
60.3
73.0
88.9
101.6
105 86
89
95
98
102
5" 2"
2 1/2"
3"
3 1/2"
4"
141.3 60.3
73.0
88.9
101.6
114.3
124 105
108
111
114
117
6" 2 1/2"
3"
3 1/2"
4"
168.3 73.0
88.9
101.6
114.3
141.3
143 121
124
127
130
137
8" 3 1/2"
4"
5"
6"
219.1 101.6
114.3
141.3
168.3
178 152
156
162
168
10" 4"
5"
6"
8"
273.0 114.3
141.3
168.3
219.1
216 184
191
194
203
12" 5"
6"
8"
10"
323.8 141.3
168.3
219.1
273.0
254 216
219
229
241
14" 6"
8"
10"
12"
355.6 168.3
219.1
273.0
323.8
279 238
248
257
270
16" 6"
8"
10"
12"
14"
406.4 168.3
219.1
273.0
323.8
355.6
305 264
273
283
295
305
18" 8"
10"
12"
14"
16"
457.0 219.1
273.0
323.8
355.6
406.4
343 298
308
321
330
330
20" 8"
10"
12"
14"
16"
18"
508.0 219.1
273.0
323.8
355.6
406.4
457.0
381 324
333
346
356
356
368
22" 10"
12"
14"
16"
18"
20"
559.0 273.0
323.8
355.6
406.4
457.0
508.0
419 359
371
381
381
394
406
24" 10"
12"
14"
16"
18"
20"
22"
610.0 273.0
323.8
355.6
406.4
457.0
508.0
559.0
432 384
397
406
406
419
432
432
Our City-wise Supply :

Ulsan, Tehran, Santiago, Kolkata, Kanpur, Dubai, Edmonton, Bengaluru, Riyadh, Ludhiana, Melbourne, Karachi, Muscat, Rajkot, Kuala Lumpur, Houston, Singapore, Nagpur, La Victoria, Rio de Janeiro, Vadodara, Faridabad, Chiyoda, Ernakulam, Kuwait City, Baroda, Howrah, Istanbul, Secunderabad, New York, Thiruvananthapuram, Lahore, Bhopal, Geoje-si, Algiers, Dammam, Mexico City, Petaling Jaya, Sydney, Jeddah, Sharjah, New Delhi, Courbevoie, Indore, Surat, Navi Mumbai, Jakarta, Moscow, Nashik, Mumbai, Ahvaz, Visakhapatnam, Busan, Montreal, Gurgaon, Hyderabad, Port-of-Spain, Doha, Granada, Calgary, Pimpri-Chinchwad, Perth, Thane, Bangkok, Haryana, Noida, Ranchi, Vung Tau, Ankara, Bogota, Jaipur, Aberdeen, Cairo, Milan, Chennai, Al Khobar, Ho Chi Minh City, Al Jubail, Pune, Hanoi, Colombo, Coimbatore, Gimhae-si, Toronto, Jamshedpur, Madrid, Brisbane, Dallas, Chandigarh, Manama, Seoul, Atyrau, Ahmedabad, Caracas.

Our International Supply chain :

Mexico, Poland, Morocco, Poland, Lithuania, Chile, Chile, Australia, Qatar, Sweden, Slovakia, Kazakhstan, Estonia, Serbia, Costa Rica, United Kingdom, Austria, Hong Kong, Puerto Rico, Netherlands, Trinidad & Tobago,Tunisia, Yemen, Indonesia, Germany, Belarus, Singapore, Gabon, Turkey, Greece, Kuwait, Bahrain, Saudi Arabia, South Africa, Ecuador, Oman, Macau, France, Italy, Japan, Croatia, Sri Lanka, Namibia, Zimbabwe, Mongolia, Denmark, Bulgaria, Nigeria, Iraq, Ghana, Algeria, Afghanistan, Nigeria, Canada, Azerbaijan, Kenya, Hungary, South Korea, Colombia, Bhutan, Vietnam, Romania, Switzerland, Libya, Ukraine, Peru, Czech Republic, Malaysia, Portugal, Philippines, Egypt, Russia, Angola, Jordan, Pakistan, Lebanon, Spain, India, Mexico, Taiwan, Argentina, New Zealand, United Arab Emirates, United States, China, Belgium, Tibet, Thailand, Bolivia, Brazil, Norway, Israel, Ireland, Bangladesh, Gambia, Venezuela, Nepal, Iran, Iran, Finland.